Multifunctional Energy Meter AMC96

Acrel AMC100 series AC precision power distribution monitoring device is a measuring device designed specifically for power management of data center servers.
The device is compact in design and can monitor the full electrical parameters, input and output switches and the status of the lightning arrester of A+B two incoming lines and 192 outgoing lines in real time.

AC incoming line

	Instrument model		AMC100-ZA
	Measurement parameters		Voltage, current, frequency, active power, reactive power, power factor, active energy, reactive energy, Zero-to-ground voltage, leakage current and zero sequence current, total harmonic content (THD), 2-63 harmonics, current and voltage unbalance, ambient temperature and humidity
	Bus voltage	Rated	220VAC
		Measuring range	±20%
		Overload	Instantaneous voltage 2 times/sec
	Current incoming circuit	Rated	Secondary 5A
		Range	0～6A
		Overload	Continuous 1.2 times, instantaneous 10 times/sec
	Temperature and humidity	Temperature Range	-40℃～+99℃
		Humidity Range	20%～90%
	Input frequency		AC45～65Hz
	Measurement accuracy	Incoming line	Voltage/current level 0.2, active power/energy level 0.5, reactive power/energy level 1
		Temperature	±1℃
		Humidity	±5%
	Auxiliary power		AMC100-ZA: signal to take power (≤15W) AMC100-ZA-P220: 220V independent power supply AMC100-ZA-P24: DC 12-24V independent power supply
	Environment	Temperature	Work: -20℃～150℃ Storage: -25℃～70℃
		Humidity	Relative humidity≤93%
		elevation	≤2500m
	Switch output		4 channels 3A 250VAC/3A 30VDC
	Switch input		8 dry nodes
	Communication		1 isolated RS485/Modbus-RTU to the background system 1 RS485/Modbus-RTU to touch screen 1 RS485/Modbus-RTU connection downstream module Optional 1-channel Ethernet communication function
	Installation Method		DIN35mm rail or bottom plate installation
	Protection level		IP20
	Pollution level		2
	Security	Insulation	The insulation resistance between all terminals and the conductive parts of the shell is not less than 100MΩ
		Withstand voltage	A voltage and current signal//B voltage and current signal//switch output//isolated communication port//between other ports meet AC2kV 1min, switch input and other ports should meet AC0.5kV 1min, leakage current Should be less than 2mA, no breakdown or flashover phenomenon.
	Electromagnetic compatibility	Anti-static interference	Level 4
		Anti-electric fast transient burst	Level 3
		Anti-surge interference	Level 4
		Resistance to  radio frequency electromagnetic field  radiation	Level 3

  AC outlet  

Note: The rated input current of the secondary side of the AMC100-FAK module is 50mA, and the default value of the primary side current is 50A.If the current transformer is different, the customer can set the transformation ratio through the touch screen or the host computer according to the actual use.

Note: The rated input current of the secondary side of the AMC100-FAK module is 50mA, and the default value of the primary side current is 50A.If the current transformer is different, the customer can set the transformation ratio through the touch screen or the host computer according to the actual use.

Active switch module

Passive switch module

Temperature measurement module