ADW300
ADW300 Wireless Metering Meter is mainly used to metering three phase active energy on low voltage network.
ATE400
It is suitable for 3-35kV indoor switchgears, including built-in switchgears, handcart switchgears, fixed switchgears and loop-net switchgears.
Wireless Temperature Transceiver
ATC600
It is suitable for 3-35kV indoor switchgears, including built-in switchgears, handcart switchgears, fixed switchgears and loop-net switchgears.
ARTM-Pn
The ARTM series electrical contact on-line temperature measuring device is suitable for temperature monitoring at cable joints/circuit breaker contacts/knife switches/high-voltage cable intermediate heads, dry-type transformers, low-voltage high-current equipment, etc. in high and low voltage switch cabinets to prevent them from running If the contact resistance of the contacts is too large due to oxidation, looseness, dust and other factors, heat generation becomes a safety hazard. This improves equipment safety, timely, continuous and accurate reflection of equipment operation status, and reduces equipment accident rate.
ADW210
The product is a rail type multi-loop power meter,including MCU module and power module, including metering module,current module and voltage input module.
ADF400L
The ADF400L series multi-user electric energy meter can achieve up to 12 three-phase or 36 single-phase direct access measurement or 12 three-phase mutual inductor access measurement, a hybrid of direct access and mutual inductor access through module combination measurement method.
Multi-Circuits AC Energy Meter
DTSD1352-4S
DTSD1352-4S series DIN-rail type multi-circuit power meter is mainly used for the full electric parameter measurement of multiple circuits, and can be connected to the current input of 4 three-phase circuits or 12 single-phase circuits at the same time. It can measure parameters such as voltage and current, power, power factor, phase angle, unbalance, and harmonics.
Multi-Circuits DC Energy Meter
AMC16L-DETT
AMC16(L)-DETT is specially designed for base stations where have sharing requirements, and switch power supply is without the function of sub-user metering. The meter could measure 6 circuits DC energy, and supply working current to the matched hall sensors. Meanwhile, it can realize zero drift calibration by upper computer software. have the functions of telemetering,teleindication,teleadjusting, metering at real time, energy quality abnormal alarm, data storage and processing, data interaction. The module can measure the DC power consumption of multiple circuits separately, providing detail datas for base station.
AIM-D100-T
AIM-D100 type products are mainly used for monitoring of the positive and negative terminal-to-ground insulation resistance in the DC ungrounded systems. When the insulation resistance is lower than the set alarm value, an alarm message can be sent. The product is based on the unbalanced bridge principle.The products can be used in DC systems such as DC EV charging systems, PV Solar systems, energy storage systems, and DC power grids.
Intelligent Miniature Circuit Breakers
ASCB1
ASCB1 series intelligent miniature circuit breakers (hereinafter referred to as intelligent miniature circuit breakers) are used in low-voltage terminal power distribution networks in industrial, commercial, civil buildings and infrastructures in indoor buildings and similar places. The intelligent miniature circuit breaker is used in conjunction with the intelligent gateway to conduct real-time monitoring of the key electrical parameters of the power line, such as voltage, current, power, temperature, leakage, energy consumption, etc. , fault location and other functions. This series of products can choose single pole, 2 pole, 3 pole and 4 pole .
UL Multi Function Energy Meter
ADL3000-E
ADL3000-E is a smart meter designed for power supply system, industrial and mining enterprises and utilities to calculate the electricity consumption and manage the electric demand.
DJSF1352-RN
DJSF1352 type electronic DC electric energy meter adopts liquid crystal display, has RS485 function, and can exchange data with the microcomputer. It is suitable for power measurement and electric energy measurement of DC signal equipment such as charging piles, batteries, solar panels, etc. It can also be used in industrial and mining enterprises, civil buildings, building automation, and other modern DC power supply and distribution systems.
UL Certified Smart Energy Meter For 1 Phase 3 Wire
AGF-AE-D
In a single inverter system, the meter is connected directly to the inverter. If your inverter has a built-in revenue grade meter (RGM; the inverter is referred to a revenue grade inverter), you can connect an external meter on the same bus as the RGM.
Battery Monitoring Collector Module
ABAT100-HS
The ABAT100-HS collector module is used as a management module for a group of battery packs to read the battery monitoring data from the front-end single battery monitoring sub-module and analyze and process the data, which can estimate the remaining capacity of each battery and the whole group of batteries. The operation parameters can be set directly by matching with the touch screen, and the collected data can be viewed directly. The collector module will automatically save the key battery data periodically and can be sent to the third party monitoring system through RS485 port, supporting MODBUS protocol. One collector module manages one group of batteries, and the maximum number of manageable modules is 120.
ABAT100-S
ABAT100-S single battery monitoring module (S module) can be embedded into existing monitoring system to achieve online monitoring of each backup battery voltage, internal resistance and negative battery temperature, in accordance with ANSI/TIA-942 standard requirements. The monitoring system controls and reads data by sending MODBUS commands to the S-module, and performs internal resistance testing, each S-module has a settable address.S-modules are extremely simple and easy to install and wire, and can be directly attached to the battery with detachable connecting wires, which does not affect the battery operation during construction.
ABAT100-C
The ABAT100-C battery monitoring module (C module) can be embedded into existing monitoring systems for online monitoring of battery charge and discharge current and ambient temperature. The monitoring system controls and reads data by sending MODBUS commands to the C-module, and each C-module has a settable address. the C-module is extremely simple and easy to install and wire, and can be directly attached to the battery with removable connection cable, which does not affect the battery operation during construction.
ABOUT US
SOLUTIONS
Copyright 2023 Acrel Co, Ltd. All Rights Reserved.
Address: 253 Yulu Road, Jiading District, Shanghai
Powered by：300.cn | SEO | Business license
