Multi-Circuits AC Energy Meter
DTSD1352-4S
DTSD1352-4S series DIN-rail type multi-circuit power meter is mainly used for the full electric parameter measurement of multiple circuits, and can be connected to the current input of 4 three-phase circuits or 12 single-phase circuits at the same time. It can measure parameters such as voltage and current, power, power factor, phase angle, unbalance, and harmonics.
Multi-Circuits DC Energy Meter
AMC16L-DETT
AMC16(L)-DETT is specially designed for base stations where have sharing requirements, and switch power supply is without the function of sub-user metering. The meter could measure 6 circuits DC energy, and supply working current to the matched hall sensors. Meanwhile, it can realize zero drift calibration by upper computer software. have the functions of telemetering,teleindication,teleadjusting, metering at real time, energy quality abnormal alarm, data storage and processing, data interaction. The module can measure the DC power consumption of multiple circuits separately, providing detail datas for base station.
AIM-D100-T
AIM-D100 type products are mainly used for monitoring of the positive and negative terminal-to-ground insulation resistance in the DC ungrounded systems. When the insulation resistance is lower than the set alarm value, an alarm message can be sent. The product is based on the unbalanced bridge principle.The products can be used in DC systems such as DC EV charging systems, PV Solar systems, energy storage systems, and DC power grids.
UL Multi Function Energy Meter
ADL3000-E
ADL3000-E is a smart meter designed for power supply system, industrial and mining enterprises and utilities to calculate the electricity consumption and manage the electric demand.
DJSF1352-RN
DJSF1352 type electronic DC electric energy meter adopts liquid crystal display, has RS485 function, and can exchange data with the microcomputer. It is suitable for power measurement and electric energy measurement of DC signal equipment such as charging piles, batteries, solar panels, etc. It can also be used in industrial and mining enterprises, civil buildings, building automation, and other modern DC power supply and distribution systems.
UL Certified Smart Energy Meter For 1 Phase 3 Wire
AGF-AE-D
In a single inverter system, the meter is connected directly to the inverter. If your inverter has a built-in revenue grade meter (RGM; the inverter is referred to a revenue grade inverter), you can connect an external meter on the same bus as the RGM.
Battery Monitoring Collector Module
ABAT100-HS
The ABAT100-HS collector module is used as a management module for a group of battery packs to read the battery monitoring data from the front-end single battery monitoring sub-module and analyze and process the data, which can estimate the remaining capacity of each battery and the whole group of batteries. The operation parameters can be set directly by matching with the touch screen, and the collected data can be viewed directly. The collector module will automatically save the key battery data periodically and can be sent to the third party monitoring system through RS485 port, supporting MODBUS protocol. One collector module manages one group of batteries, and the maximum number of manageable modules is 120.
ABAT100-S
ABAT100-S single battery monitoring module (S module) can be embedded into existing monitoring system to achieve online monitoring of each backup battery voltage, internal resistance and negative battery temperature, in accordance with ANSI/TIA-942 standard requirements. The monitoring system controls and reads data by sending MODBUS commands to the S-module, and performs internal resistance testing, each S-module has a settable address.S-modules are extremely simple and easy to install and wire, and can be directly attached to the battery with detachable connecting wires, which does not affect the battery operation during construction.
ABAT100-C
The ABAT100-C battery monitoring module (C module) can be embedded into existing monitoring systems for online monitoring of battery charge and discharge current and ambient temperature. The monitoring system controls and reads data by sending MODBUS commands to the C-module, and each C-module has a settable address. the C-module is extremely simple and easy to install and wire, and can be directly attached to the battery with removable connection cable, which does not affect the battery operation during construction.
UL Three Phase Bidirectional Monitor Meter with Split CT
ADL400N-CT
ADL series DIN-rail mounted multifunctional electric energy meter is an intelligent instrument mainly designed for new energy power generation systems such as photovoltaic grid-connected system, micro inverter system, energy storage system, AC coupling system, etc. The product has the advantages of high precision, small volume, high respondent speed and convenient installation. The product has the features of sampling, metering and monitoring power parameters,communicating with an inverter or an energy management system (EMS), realizing the functions of preventing reverse flow, regulating power generation, charging and discharging batteries according to real-time power and accumulated electric energy, and realizing bidirectional metering and household distributed photovoltaic energy management.
UL Single Phase Bidirectional Monitor Meter with Split CT
ADL200N-CT
ADL series DIN-rail mounted multifunctional electric energy meter is an intelligent instrument mainly designed for new energy power generation systems such as photovoltaic grid-connected system, micro inverter system, energy storage system, AC coupling system, etc. The product has the advantages of high precision, small volume, high respondent speed and convenient installation. The product has the features of sampling, metering and monitoring power parameters,communicating with an inverter or an energy management system (EMS), realizing the functions of preventing reverse flow, regulating power generation, charging and discharging batteries according to real-time power and accumulated electric energy, and realizing bidirectional metering and household distributed photovoltaic energy management.
APM520
APM5 series network power meter (hereinafter referred to as the meter) is designed according to IEC international standards,with full power measurement, power statistics, power quality analysis (including harmonics, interharmonics, flicker),fault recording function (including voltage temporary rise and fall interrupt, inrush current and other records),event recording function and network communication and other functions. It is mainly used for comprehensive monitoring of power supply quality in the power grid. This series of meters is equipped with feature-rich DI/DO modules, AO modules, wireless communication modules, leakage temperature measurement modules,which can flexibly realize the full electrical circuit Power measurement and switching status monitoring.
Intelligent Power Collection And Monitoring Device
AMC96L-E4/KC
AMC series intelligent power collection and monitoring device is a smart meter designed for power moni toring needs of power systems, industrial and mining enterprises, utilities, and intelligent buildings.
ADL200
ADL200 single phase electric meter is designed for single phase active energy measurement on low voltage system, in the same time it can measure the electrical parameters like voltage, current, power and so on.
ADL400
ADL400 is a smart meter designed for power supply systems, industrial and mining enterprises, and utilities to calculate electricity consumption and manage electric demand. It features high precision, small size, and simple installation. It integrates the measurement of all electrical parameters with the comprehensive electricity metering and management provides various data on the previous 48 months, and checks the 31st harmonic content and the total harmonic content.
AIM-M100
The AIM-M100 medical intelligent insulation monitor is compact, easy to install, intelligent, digital, and networked, and is an ideal choice for insulation monitoring of isolation power supply systems in operating rooms, intensive care units, and other medical places.
ABOUT US
SOLUTIONS
Copyright 2023 Acrel Co, Ltd. All Rights Reserved.
Address: 253 Yulu Road, Jiading District, Shanghai
Powered by：300.cn | SEO | Business license
