IOT Energy meter

ADW300

ADW300 Wireless Metering Meter is mainly used to metering three phase active energy on low voltage network.

Wireless Temperature Sensor

ATE400

It is suitable for 3-35kV  indoor switchgears, including built-in switchgears, handcart switchgears, fixed switchgears and loop-net switchgears.

Wireless Temperature Transceiver

ATC600

It is suitable for 3-35kV  indoor switchgears, including built-in switchgears, handcart switchgears, fixed switchgears and loop-net switchgears.

Wireless Temperature Receiver

ARTM-Pn

The ARTM series electrical contact on-line temperature measuring device is suitable for temperature monitoring at cable joints/circuit breaker contacts/knife switches/high-voltage cable intermediate heads, dry-type transformers, low-voltage high-current equipment, etc. in high and low voltage switch cabinets to prevent them from running If the contact resistance of the contacts is too large due to oxidation, looseness, dust and other factors, heat generation becomes a safety hazard. This improves equipment safety, timely, continuous and accurate reflection of equipment operation status, and reduces equipment accident rate.

Multi-Circuits Energy Meter

ADW210

The product is a rail type multi-loop power meter,including MCU module and power module, including metering module,current module and voltage input module.

Multi-Circuits Energy Meter

ADF400L

The ADF400L series multi-user electric energy meter can achieve up to 12 three-phase or 36 single-phase direct access measurement or 12 three-phase mutual inductor access measurement, a hybrid of direct access and mutual inductor access through module combination measurement method. 

Multi-Circuits DC Energy Meter

AMC16L-DETT

AMC16(L)-DETT is specially designed for base stations where have sharing requirements, and switch power supply is without the function of sub-user metering. The meter could measure 6 circuits DC energy, and supply working current to the matched hall sensors. Meanwhile, it can realize zero drift calibration by upper computer software. have the functions of telemetering,teleindication,teleadjusting, metering at real time, energy quality abnormal alarm, data storage and processing, data interaction. The module can measure the DC power consumption of multiple circuits separately, providing detail datas for base station.

DC Insulation Monitor

AIM-D100-T

AIM-D100 type products are mainly used for monitoring of the positive and negative terminal-to-ground insulation resistance in the DC ungrounded systems. When the insulation resistance is lower than the set alarm value, an alarm message can be sent. The product is based on the unbalanced bridge principle.The products can be used in DC systems such as DC EV charging systems, PV Solar systems, energy storage systems, and DC power grids.

Intelligent Miniature Circuit Breakers

ASCB1

ASCB1 series intelligent miniature circuit breakers (hereinafter referred to as intelligent miniature circuit breakers) are used in low-voltage terminal power distribution networks in industrial, commercial, civil buildings and infrastructures in indoor buildings and similar places. The intelligent miniature circuit breaker is used in conjunction with the intelligent gateway to conduct real-time monitoring of the key electrical parameters of the power line, such as voltage, current, power, temperature, leakage, energy consumption, etc. , fault location and other functions. This series of products can choose single pole, 2 pole, 3 pole and 4 pole .

UL DC Energy Meter

DJSF1352-RN

DJSF1352 type electronic DC electric energy meter adopts liquid crystal display, has RS485 function, and can exchange data with the microcomputer. It is suitable for power measurement and electric energy measurement of DC signal equipment such as charging piles, batteries, solar panels, etc. It can also be used in industrial and mining enterprises, civil buildings, building automation, and other modern DC power supply and distribution systems.