DC Voltage Meter

Description

AMC series programmable intelligent meters, adopting AC sampling technology, can directly or indirectly measure the electric voltage and current of single-phase or three-phase grids. It can be used for local display, and connecting industrial control devices to form measuring control systems. This series of meters have RS-485 port, adopt Modbus-RTU protocol. Analog output, alarm output, and switching input/ output can be selected. Based on different requests, by pressing the keys, parameters of ratio, alarm, communication, etc. can be modified.

Installation: Easy Installation	Communication: RS 485

Certificate: CE/IEC	Quality: Quality Assurance

Parameters

Size

Panel Overview

Structure

Wiring Diagram

DC Current Signal (5A DC) Input via direct Connection

DC Current Signal (0~20mA or 4~20mA DC) Input via DC Sensor

DC Current Signal (75mV DC) Input via -/75mV Shunt

Related Products & Projects

Feel free to contact me:

Tel：+86 15076062079

Whatsapp: +86 15076062079
E-mail: binn@acrel-electric.com
Address: 253 Yulu Road, Jiading District, Shanghai

ABOUT US

SOLUTIONS

PRODUCTS

E-mail

Technical Parameter		Value
Input	Rated Value	DC voltage:1000V,300V,75mV,10V; DC current: 0-20mA,4-20mA,5A;
	Overload	Voltage: 1.2 times rated value(continuous);2 times rated value /1 second Current:1.2 times rated value(continuous);10 times rated value /1 second
	Frequency	45Hz~65Hz
	Power Consumption	Power consumption of each voltage, current input circuit is less than 0.5VA
Accuracy class	0.5 Class
Function	Display		LED or LCD
	Communication		RS485, Modbus-RTU protocol;(1 start bit,8 data bit,1 stop bit, no parity) Baud Rate 2400/4800/9600/19200 bps etc.
	Alarm		1 channel passive relay,contact capacity 3A/30VDC, 3A/250VAC, Used for high,low,unbalance alarm etc.
	Analog		DC4~20mA,( load <500Ω) (note: Shielded wire is specially selected for the above signal input and output)
Auxiliary Supply	Voltage Range	DC 85-265V
	Power Consumption	≤5VA
Insulation Resistance		≥100MΩ