English

Power Quality Monitor

APView500

Steady/Temporary/Transient/Event Recorder/Waveform Recorder

DOWNLOAD PDF >>

CONTACT >>

Home page

DESCRIPTION

Description

The APView500 uses a high-performance multi-core platform and embedded OS. It adheres to the measurement methods for power quality indices specified in IEC 61000-4-30, integrating functions such as harmonic analysis, waveform sampling, voltage sag/swell/interruption detection, flicker monitoring, voltage unbalance monitoring, event recording, and measurement control. Meeting Class A national standards, it is suitable for power quality monitoring in 110kV and below systems across industries like chemical,steel, and data centers.Featuring a dual-circuit design, it supports simultaneous monitoring of two incoming lines, ideal for single busbar sectioned/non-sectioned dual incoming line systems and two single busbar single incoming line systems.

Installation: Easy Installation	Service: 24 Hour

Certificate: CE/IEC	Quality: Quality Assurance

Parameters

Size

Panel Overview

Wiring Diagram

Application

Home page

Interface Descriptions

Download

468 APView500安装使用说明书V2.0-20250206(1).pdf

Download

APView 0.2s第三方报告英文 IEC 62053-22 XNZ202402126【基本的正反有功电能误差试验，包括平衡和不平衡两种】.pdf

Download

APView 0.2s第三方报告英文 IEC 62053-22 XNZ202402125【启动电流门槛、重复试验方差误差】.pdf

Download

Power Quality Monitor

Product Summary:

Used for connection between pipe ends; Also useful is a flange on the inlet and outlet of the equipment, used for connecting between two devices, such as a gearbox flange. Flange connection or flange joint refers to a detachable connection consisting of flanges, gaskets, and bolts connected to each other as a combination sealing structure. Pipeline flange refers to the flange used for piping in pipeline devices, and when used on equipment, it refers to the inlet and outlet flanges of the equipment. There are holes on the flange, and bolts make the two flanges tightly connected. Seal the flanges with gaskets.

Classification：Butt welded pipe fittings

Keywords: Butt welded pipe parts

产品详细

There are GB series (national standard), JB series (mechanical department), HG series (chemical department), ASME B16.5 (American standard), BS4504 (British standard), DIN (German standard), JIS (Japanese standard).

Advantages:

The on-site installation is more convenient, and the process of welding seam rubbing can be omitted

Disadvantages:

The neck height of the flat welded flange with a neck is relatively low, which improves the stiffness and load-bearing capacity of the flange. Compared with butt welded flanges, the welding workload is large, the consumption of welding rods is high, and it cannot withstand high temperature and pressure, repeated bending, and temperature fluctuations.

The connection is not easily deformed, with good sealing effect, and is widely used. It is suitable for pipelines with significant temperature or pressure fluctuations, as well as pipelines with high, high, and low temperatures. It is also used for transporting expensive media, flammable and explosive media, and toxic gases